SSP 64mm Burrs to fit Fellow Ode, DF64, Lagom P64, Super Jolly, Mazzer Mini 64mm

Product description

Are you looking to buy SSP 64mm Burrs to fit Fellow Ode, DF64, Lagom P64, Super Jolly, Mazzer Mini 64mm in Australia?

SSP's full 64mm range for grinders built around the standard 64mm Mazzer burr pattern. Choose the burr and coating above. These are the drilled, screw-hole sets. Zerno Z1 owners can use these with screws, or our SSP 64mm Blind Burrs that locate in the Z1's burr pockets.

Which burr

• High Uniformity (HU): the espresso burr, and the easiest SSP 64mm to dial in. Full bodied shots that suit milk drinks and medium to dark roasts on any 9 bar machine. Not the one to buy for filter.
• Lab Sweet V3 (CV3): our all-rounder pick. Espresso first with more sweetness and clarity than the HU, and good on filter too. Most owners build pressure easily on a standard 9 bar machine; very light roasts can be hard to grind fine enough.
• Lab Sweet V2 (CV2): sweet, juicy and round, and a filter burr first. It can make espresso, but some sets struggle to grind fine enough for a classic 9 bar shot, so espresso drinkers should choose the V3.
• Multi-Purpose V3 (MPV3): SSP's newest 64mm cut. Early reports say it is a softer, sweeter and more forgiving filter burr than the MPV2. There are only a few owner reports so far.
• Multi-Purpose V2 (MPV2): the clarity burr. A light body, sharp acidity and very distinct flavours, for light roasts. Great for filter; for espresso it suits pressure profiling or lever machines and longer, lower pressure shots. It has a narrow sweet spot and shows up faults in the coffee.
• Brew (UMV1): SSP's original unimodal burr, now sold as the brew cut. Filter only, with the most clarity in the range, for light washed coffees.
• SKD11 (uncoated): plain tool steel with no coating. It costs less than the coated sets and wears faster, but still lasts years of home use. Ask us which cut is in stock before you order.

Choose the cut first. SSP suggests Red Speed (TiAlCN) for espresso and Silver Knight for filter. Owners who have compared both mostly say the cut makes the bigger difference. Both are rated for roughly 4,000 to 5,000kg of coffee.

Compatibility

• Fellow Ode Gen 2, and Ode Gen 1 made from late 2021 on (digits 12 to 14 of the serial under the grinder should read 210 or higher). Fellow's warranty does not cover espresso grinding on the Ode
• Every DF64: Gen 1, Gen 2, DF64E, DF64P, DF64V and Turin DF64 models
• Option-O Lagom P64
• Acaia Orbit
• Mazzer Super Jolly (including V Up and V Pro)
• Current 64mm Mazzer Mini and Mini Electronic (Type A and B)
• Zerno Z1 with the screw-in burr kit (or choose our SSP 64mm Blind Burrs)
• Timemore Sculptor 064S
• Anfim Caimano and Cody II (listed by SSP retailers)
• Ceado E5P, E6P and E37J (listed by SSP retailers)
• Profitec Pro T64 (listed by SSP retailers)

Not for Eureka grinders (SSP makes a separate Eureka set), older 58mm Mazzer Minis, the Timemore Sculptor 064 (non-S) or 064S II, DF54, Bentwood or any conical grinder. Ask us before ordering for ECM, Mazzer Philos, Mazzer Mini G or Mahlkoenig X64 grinders.

SSP burrs sit slightly taller than most stock burrs, and cast Lab Sweet sets taller again, so find your new zero point slowly after fitting. Mazzer owners should centre the burrs before tightening the screws, and be ready to shim if they do not seat flat.

Features

• 64 x 64 x 8mm machined tool steel, made by SSP in South Korea
• Six coated burrs in Red Speed or Silver Knight, plus uncoated SKD11
• Season with 3kg to 5kg of coffee before you judge the cup

What's in the box

• 1 x set of SSP 64mm burrs (upper and lower) in the burr and coating you choose

About SSP

Family owned and operated since 1991, SSP Grinding Solutions is a South Korean maker of precision grinding tools and custom burr sets.

See the full range in our SSP Burrs collection.